Differences

This shows you the differences between two versions of the page.

Link to this comparison view

httpd_conf [2014/10/26 01:52] (current)
Line 1: Line 1:
 +==== httpd.conf ====
 +
 +<​code>​
 +#
 +# Based upon the NCSA server configuration files originally by Rob McCool.
 +#
 +# This is the main Apache server configuration file.  It contains the
 +# configuration directives that give the server its instructions.
 +# See <​URL:​http://​httpd.apache.org/​docs-2.0/>​ for detailed information about
 +# the directives.
 +#
 +# Do NOT simply read the instructions in here without understanding
 +# what they do.  They'​re here only as hints or reminders. ​ If you are unsure
 +# consult the online docs. You have been warned.  ​
 +#
 +# The configuration directives are grouped into three basic sections:
 +#  1. Directives that control the operation of the Apache server process as a
 +#     whole (the '​global environment'​).
 +#  2. Directives that define the parameters of the '​main'​ or '​default'​ server,
 +#     which responds to requests that aren't handled by a virtual host.
 +#     These directives also provide default values for the settings
 +#     of all virtual hosts.
 +#  3. Settings for virtual hosts, which allow Web requests to be sent to
 +#     ​different IP addresses or hostnames and have them handled by the
 +#     same Apache server process.
 +#
 +# Configuration and logfile names: If the filenames you specify for many
 +# of the server'​s control files begin with "/"​ (or "​drive:/"​ for Win32), the
 +# server will use that explicit path.  If the filenames do *not* begin
 +# with "/",​ the value of ServerRoot is prepended -- so "​logs/​foo.log"​
 +# with ServerRoot set to "​C:/​Program Files/​Apache Group/​Apache2"​ will be interpreted by the
 +# server as "​C:/​Program Files/​Apache Group/​Apache2/​logs/​foo.log"​.
 +#
 +# NOTE: Where filenames are specified, you must use forward slashes
 +# instead of backslashes (e.g., "​c:/​apache"​ instead of "​c:​\apache"​).
 +# If a drive letter is omitted, the drive on which Apache.exe is located
 +# will be used by default. ​ It is recommended that you always supply
 +# an explicit drive letter in absolute paths, however, to avoid
 +# confusion.
 +#
 +
 +### Section 1: Global Environment
 +#
 +# The directives in this section affect the overall operation of Apache,
 +# such as the number of concurrent requests it can handle or where it
 +# can find its configuration files.
 +#
 +
 +#
 +# ServerRoot: The top of the directory tree under which the server'​s
 +# configuration,​ error, and log files are kept.
 +#
 +# NOTE!  If you intend to place this on an NFS (or otherwise network)
 +# mounted filesystem then please read the LockFile documentation (available
 +# at <​URL:​http://​httpd.apache.org/​docs-2.0/​mod/​mpm_common.html#​lockfile>​);​
 +# you will save yourself a lot of trouble.
 +#
 +# Do NOT add a slash at the end of the directory path.
 +#
 +ServerRoot "​C:/​Program Files/​Apache Group/​Apache2"​
 +
 +#
 +# ScoreBoardFile:​ File used to store internal server process information.
 +# If unspecified (the default), the scoreboard will be stored in an
 +# anonymous shared memory segment, and will be unavailable to third-party
 +# applications.
 +# If specified, ensure that no two invocations of Apache share the same
 +# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
 +#
 +#​ScoreBoardFile logs/​apache_runtime_status
 +
 +#
 +# PidFile: The file in which the server should record its process
 +# identification number when it starts.
 +#
 +PidFile logs/​httpd.pid
 +
 +#
 +# Timeout: The number of seconds before receives and sends time out.
 +#
 +Timeout 300
 +
 +#
 +# KeepAlive: Whether or not to allow persistent connections (more than
 +# one request per connection). Set to "​Off"​ to deactivate.
 +#
 +KeepAlive On
 +
 +#
 +# MaxKeepAliveRequests:​ The maximum number of requests to allow
 +# during a persistent connection. Set to 0 to allow an unlimited amount.
 +# We recommend you leave this number high, for maximum performance.
 +#
 +MaxKeepAliveRequests 100
 +
 +#
 +# KeepAliveTimeout:​ Number of seconds to wait for the next request from the
 +# same client on the same connection.
 +#
 +KeepAliveTimeout 15
 +
 +##
 +## Server-Pool Size Regulation (MPM specific)
 +## 
 +
 +# WinNT MPM
 +# ThreadsPerChild:​ constant number of worker threads in the server process
 +# MaxRequestsPerChild:​ maximum ​ number of requests a server process serves
 +<​IfModule mpm_winnt.c>​
 +ThreadsPerChild 250
 +MaxRequestsPerChild ​ 0
 +</​IfModule>​
 +
 +#
 +# Listen: Allows you to bind Apache to specific IP addresses and/or
 +# ports, instead of the default. See also the <​VirtualHost>​
 +# directive.
 +#
 +# Change this to Listen on specific IP addresses as shown below to 
 +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
 +#
 +#Listen 12.34.56.78:​80
 +Listen 8008
 +
 +#
 +# Dynamic Shared Object (DSO) Support
 +#
 +# To be able to use the functionality of a module which was built as a DSO you
 +# have to place corresponding `LoadModule'​ lines at this location so the
 +# directives contained in it are actually available _before_ they are used.
 +# Statically compiled modules (those listed by `httpd -l') do not need
 +# to be loaded here.
 +#
 +# Example:
 +# LoadModule foo_module modules/​mod_foo.so
 +#
 +LoadModule access_module modules/​mod_access.so
 +LoadModule actions_module modules/​mod_actions.so
 +LoadModule alias_module modules/​mod_alias.so
 +LoadModule asis_module modules/​mod_asis.so
 +LoadModule auth_module modules/​mod_auth.so
 +#LoadModule auth_anon_module modules/​mod_auth_anon.so
 +#LoadModule auth_dbm_module modules/​mod_auth_dbm.so
 +#LoadModule auth_digest_module modules/​mod_auth_digest.so
 +LoadModule autoindex_module modules/​mod_autoindex.so
 +#LoadModule cern_meta_module modules/​mod_cern_meta.so
 +LoadModule cgi_module modules/​mod_cgi.so
 +#LoadModule dav_module modules/​mod_dav.so
 +#LoadModule dav_fs_module modules/​mod_dav_fs.so
 +LoadModule dir_module modules/​mod_dir.so
 +LoadModule env_module modules/​mod_env.so
 +#LoadModule expires_module modules/​mod_expires.so
 +#LoadModule file_cache_module modules/​mod_file_cache.so
 +#LoadModule headers_module modules/​mod_headers.so
 +LoadModule imap_module modules/​mod_imap.so
 +LoadModule include_module modules/​mod_include.so
 +#LoadModule info_module modules/​mod_info.so
 +LoadModule isapi_module modules/​mod_isapi.so
 +LoadModule log_config_module modules/​mod_log_config.so
 +LoadModule mime_module modules/​mod_mime.so
 +#LoadModule mime_magic_module modules/​mod_mime_magic.so
 +#LoadModule proxy_module modules/​mod_proxy.so
 +#LoadModule proxy_connect_module modules/​mod_proxy_connect.so
 +#LoadModule proxy_http_module modules/​mod_proxy_http.so
 +#LoadModule proxy_ftp_module modules/​mod_proxy_ftp.so
 +LoadModule negotiation_module modules/​mod_negotiation.so
 +#LoadModule rewrite_module modules/​mod_rewrite.so
 +LoadModule setenvif_module modules/​mod_setenvif.so
 +#LoadModule speling_module modules/​mod_speling.so
 +LoadModule status_module modules/​mod_status.so
 +#LoadModule unique_id_module modules/​mod_unique_id.so
 +LoadModule userdir_module modules/​mod_userdir.so
 +#LoadModule usertrack_module modules/​mod_usertrack.so
 +#LoadModule vhost_alias_module modules/​mod_vhost_alias.so
 +#LoadModule ssl_module modules/​mod_ssl.so
 +
 +#
 +# ExtendedStatus controls whether Apache will generate "​full"​ status
 +# information (ExtendedStatus On) or just basic information (ExtendedStatus
 +# Off) when the "​server-status"​ handler is called. The default is Off.
 +#
 +ExtendedStatus On
 +
 +### Section 2: '​Main'​ server configuration
 +#
 +# The directives in this section set up the values used by the '​main'​
 +# server, which responds to any requests that aren't handled by a
 +# <​VirtualHost>​ definition. ​ These values also provide defaults for
 +# any <​VirtualHost>​ containers you may define later in the file.
 +#
 +# All of these directives may appear inside <​VirtualHost>​ containers,
 +# in which case these default settings will be overridden for the
 +# virtual host being defined.
 +#
 +
 +#
 +# ServerAdmin:​ Your address, where problems with the server should be
 +# e-mailed. ​ This address appears on some server-generated pages, such
 +# as error documents. ​ e.g. admin@your-domain.com
 +#
 +ServerAdmin admin@mnain.org
 +
 +#
 +# ServerName gives the name and port that the server uses to identify itself.
 +# This can often be determined automatically,​ but we recommend you specify
 +# it explicitly to prevent problems during startup.
 +#
 +# If this is not set to valid DNS name for your host, server-generated
 +# redirections will not work.  See also the UseCanonicalName directive.
 +#
 +# If your host doesn'​t have a registered DNS name, enter its IP address here.
 +# You will have to access it by its address anyway, and this will make 
 +# redirections work in a sensible way.
 +#
 +ServerName www.mnain.org:​80
 +
 +#
 +# UseCanonicalName:​ Determines how Apache constructs self-referencing ​
 +# URLs and the SERVER_NAME and SERVER_PORT variables.
 +# When set "​Off",​ Apache will use the Hostname and Port supplied
 +# by the client. ​ When set "​On",​ Apache will use the value of the
 +# ServerName directive.
 +#
 +UseCanonicalName Off
 +
 +#
 +# DocumentRoot:​ The directory out of which you will serve your
 +# documents. By default, all requests are taken from this directory, but
 +# symbolic links and aliases may be used to point to other locations.
 +#
 +#​DocumentRoot "​C:/​Program Files/​Apache Group/​Apache2/​htdocs"​
 +DocumentRoot ​ "​C:/​htdocs"​
 +
 +#
 +# Each directory to which Apache has access can be configured with respect
 +# to which services and features are allowed and/or disabled in that
 +# directory (and its subdirectories). ​
 +#
 +# First, we configure the "​default"​ to be a very restrictive set of 
 +# features.  ​
 +#
 +<​Directory />
 +    Options FollowSymLinks
 +    AllowOverride None
 +</​Directory>​
 +
 +#
 +# Note that from this point forward you must specifically allow
 +# particular features to be enabled - so if something'​s not working as
 +# you might expect, make sure that you have specifically enabled it
 +# below.
 +#
 +
 +#
 +# This should be changed to whatever you set DocumentRoot to.
 +#
 +<​Directory "​C:/​Program Files/​Apache Group/​Apache2/​htdocs">​
 +
 +#
 +# Possible values for the Options directive are "​None",​ "​All",​
 +# or any combination of:
 +#   ​Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
 +#
 +# Note that "​MultiViews"​ must be named *explicitly* --- "​Options All"
 +# doesn'​t give it to you.
 +#
 +# The Options directive is both complicated and important. ​ Please see
 +# http://​httpd.apache.org/​docs-2.0/​mod/​core.html#​options
 +# for more information.
 +#
 +    Options Indexes FollowSymLinks
 +
 +#
 +# AllowOverride controls what directives may be placed in .htaccess files.
 +# It can be "​All",​ "​None",​ or any combination of the keywords:
 +#   ​Options FileInfo AuthConfig Limit
 +#
 +    AllowOverride None
 +
 +#
 +# Controls who can get stuff from this server.
 +#
 +    Order allow,deny
 +    Allow from all
 +
 +</​Directory>​
 +
 +#
 +# UserDir: The name of the directory that is appended onto a user's home
 +# directory if a ~user request is received. ​ Be especially careful to use
 +# proper, forward slashes here.  On Windows NT, "​Personal/​My Website"​
 +# is a more appropriate choice.
 +#
 +UserDir "My Documents/​My Website"​
 +
 +#
 +# Control access to UserDir directories. ​ The following is an example
 +# for a site where these directories are restricted to read-only.
 +#
 +# You must correct the path for the root to match your system'​s configured
 +# user directory location, e.g. "​C:/​WinNT/​profiles/​*/​My Documents/​My Website"​
 +# or whichever, as appropriate.
 +#
 +#<​Directory "​C:/​Documents and Settings/​*/​My Documents/​My Website">​
 +#    AllowOverride FileInfo AuthConfig Limit
 +#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
 +#    <Limit GET POST OPTIONS PROPFIND>​
 +#        Order allow,deny
 +#        Allow from all
 +#    </​Limit>​
 +#    <​LimitExcept GET POST OPTIONS PROPFIND>​
 +#        Order deny,allow
 +#        Deny from all
 +#    </​LimitExcept>​
 +#</​Directory>​
 +
 +#
 +# DirectoryIndex:​ sets the file that Apache will serve if a directory
 +# is requested.
 +#
 +# The index.html.var file (a type-map) is used to deliver content-
 +# negotiated documents. ​ The MultiViews Option can be used for the 
 +# same purpose, but it is much slower.
 +#
 +DirectoryIndex index.html index.html.var
 +
 +#
 +# AccessFileName:​ The name of the file to look for in each directory
 +# for additional configuration directives. ​ See also the AllowOverride ​
 +# directive.
 +#
 +AccessFileName .htaccess
 +
 +#
 +# The following lines prevent .htaccess and .htpasswd files from being 
 +# viewed by Web clients. ​
 +#
 +<Files ~ "​^\.ht">​
 +    Order allow,deny
 +    Deny from all
 +</​Files>​
 +
 +#
 +# TypesConfig describes where the mime.types file (or equivalent) is
 +# to be found.
 +#
 +TypesConfig conf/​mime.types
 +
 +#
 +# DefaultType is the default MIME type the server will use for a document
 +# if it cannot otherwise determine one, such as from filename extensions.
 +# If your server contains mostly text or HTML documents, "​text/​plain"​ is
 +# a good value. ​ If most of your content is binary, such as applications
 +# or images, you may want to use "​application/​octet-stream"​ instead to
 +# keep browsers from trying to display binary files as though they are
 +# text.
 +#
 +DefaultType text/plain
 +
 +#
 +# The mod_mime_magic module allows the server to use various hints from the
 +# contents of the file itself to determine its type.  The MIMEMagicFile
 +# directive tells the module where the hint definitions are located.
 +#
 +<​IfModule mod_mime_magic.c>​
 +    MIMEMagicFile conf/magic
 +</​IfModule>​
 +
 +#
 +# HostnameLookups:​ Log the names of clients or just their IP addresses
 +# e.g., www.apache.org (on) or 204.62.129.132 (off).
 +# The default is off because it'd be overall better for the net if people
 +# had to knowingly turn this feature on, since enabling it means that
 +# each client request will result in AT LEAST one lookup request to the
 +# nameserver.
 +#
 +HostnameLookups Off
 +
 +#
 +# EnableMMAP: Control whether memory-mapping is used to deliver
 +# files (assuming that the underlying OS supports it).
 +# The default is on; turn this off if you serve from NFS-mounted ​
 +# filesystems. ​ On some systems, turning it off (regardless of
 +# filesystem) can improve performance;​ for details, please see
 +# http://​httpd.apache.org/​docs-2.0/​mod/​core.html#​enablemmap
 +#
 +#EnableMMAP off
 +
 +#
 +# EnableSendfile:​ Control whether the sendfile kernel support is 
 +# used  to deliver files (assuming that the OS supports it).
 +# The default is on; turn this off if you serve from NFS-mounted ​
 +# filesystems. ​ Please see
 +# http://​httpd.apache.org/​docs-2.0/​mod/​core.html#​enablesendfile
 +#
 +#​EnableSendfile off
 +
 +#
 +# ErrorLog: The location of the error log file.
 +# If you do not specify an ErrorLog directive within a <​VirtualHost>​
 +# container, error messages relating to that virtual host will be
 +# logged here.  If you *do* define an error logfile for a <​VirtualHost>​
 +# container, that host's errors will be logged there and not here.
 +#
 +ErrorLog logs/​error.log
 +
 +#
 +# LogLevel: Control the number of messages logged to the error.log.
 +# Possible values include: debug, info, notice, warn, error, crit,
 +# alert, emerg.
 +#
 +LogLevel warn
 +
 +#
 +# The following directives define some format nicknames for use with
 +# a CustomLog directive (see below).
 +#
 +LogFormat "%h %l %u %t \"​%r\"​ %>s %b \"​%{Referer}i\"​ \"​%{User-Agent}i\""​ combined
 +LogFormat "%h %l %u %t \"​%r\"​ %>s %b" common
 +LogFormat "​%{Referer}i -> %U" referer
 +LogFormat "​%{User-agent}i"​ agent
 +
 +# You need to enable mod_logio.c to use %I and %O
 +#LogFormat "%h %l %u %t \"​%r\"​ %>s %b \"​%{Referer}i\"​ \"​%{User-Agent}i\"​ %I %O" combinedio
 +
 +#
 +# The location and format of the access logfile (Common Logfile Format).
 +# If you do not define any access logfiles within a <​VirtualHost>​
 +# container, they will be logged here.  Contrariwise,​ if you *do*
 +# define per-<​VirtualHost>​ access logfiles, transactions will be
 +# logged therein and *not* in this file.
 +#
 +CustomLog logs/​access.log common
 +
 +#
 +# If you would like to have agent and referer logfiles, uncomment the
 +# following directives.
 +#
 +#CustomLog logs/​referer.log referer
 +#CustomLog logs/​agent.log agent
 +
 +#
 +# If you prefer a single logfile with access, agent, and referer information
 +# (Combined Logfile Format) you can use the following directive.
 +#
 +#CustomLog logs/​access.log combined
 +
 +#
 +# ServerTokens
 +# This directive configures what you return as the Server HTTP response
 +# Header. The default is '​Full'​ which sends information about the OS-Type
 +# and compiled in modules.
 +# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
 +# where Full conveys the most information,​ and Prod the least.
 +#
 +ServerTokens Full
 +
 +#
 +# Optionally add a line containing the server version and virtual host
 +# name to server-generated pages (internal error documents, FTP directory ​
 +# listings, mod_status and mod_info output etc., but not CGI generated ​
 +# documents or custom error documents).
 +# Set to "​EMail"​ to also include a mailto: link to the ServerAdmin.
 +# Set to one of:  On | Off | EMail
 +#
 +ServerSignature On
 +
 +#
 +# Aliases: Add here as many aliases as you need (with no limit). The format is 
 +# Alias fakename realname
 +#
 +# Note that if you include a trailing / on fakename then the server will
 +# require it to be present in the URL.  So "/​icons"​ isn't aliased in this
 +# example, only "/​icons/"​. ​ If the fakename is slash-terminated,​ then the 
 +# realname must also be slash terminated, and if the fakename omits the 
 +# trailing slash, the realname must also omit it.
 +#
 +# We include the /icons/ alias for FancyIndexed directory listings. ​ If you
 +# do not use FancyIndexing,​ you may comment this out.
 +#
 +Alias /icons/ "​C:/​Program Files/​Apache Group/​Apache2/​icons/"​
 +
 +<​Directory "​C:/​Program Files/​Apache Group/​Apache2/​icons">​
 +    Options Indexes MultiViews
 +    AllowOverride None
 +    Order allow,deny
 +    Allow from all
 +</​Directory>​
 +
 +Alias /quartz "​C:/​Madan/​learn/​Quartz/​docs"​
 +<​Directory "​C:/​Madan/​learn/​Quartz/​docs">​
 +    Options Indexes MultiViews Indexes Includes FollowSymLinks ExecCGI ​
 +    AllowOverride None
 +    Order allow,deny
 +    Allow from all
 +</​Directory>​
 +
 +Alias /yui "​C:/​Madan/​learn/​yui/​docs"​
 +<​Directory "​C:/​Madan/​learn/​yui/​docs">​
 +    Options Indexes MultiViews Indexes Includes FollowSymLinks ExecCGI ​
 +    AllowOverride None
 +    Order allow,deny
 +    Allow from all
 +</​Directory>​
 +
 +Alias /​actionmailer "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​actionmailer-1.2.5/​rdoc"​
 +
 +Alias /actionpack "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​actionpack-1.12.5/​rdoc"​
 +
 +Alias /​activerecord "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​activerecord-1.14.4/​rdoc"​
 +
 +Alias /​activesupport "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​activesupport-1.3.1/​rdoc"​
 +
 +Alias /log4r "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​log4r-1.0.5/​rdoc"​
 +
 +Alias /sqlite3 "​C:/​ruby/​lib/​ruby/​gems/​1.8/​doc/​sqlite3-ruby-1.1.0-mswin32/​rdoc"​
 +
 +Alias /hsqldb "​C:/​Madan/​learn/​hsqldb/​doc/​guide"​
 +
 +Alias /chartdir "​C:/​htdocs/​ChartDirector/​doc"​
 +
 +Alias /jrobin "​C:/​Madan/​learn/​jrobin-1.4.0/​doc"​
 +
 +Alias /javadocs "​C:/​htdocs/​javadoc"​
 +
 +Alias /hibernate "​C:/​Madan/​learn/​hibernate-3.2/​doc/​reference/​en/​html"​
 +
 +Alias /struts "​C:/​Madan/​learn/​struts-1.3.5/​docs"​
 +
 +Alias /yui "​C:/​Madan/​learn/​yui/​docs"​
 +
 +#
 +# This should be changed to the ServerRoot/​manual/​. ​ The alias provides
 +# the manual, even if you choose to move your DocumentRoot. ​ You may comment
 +# this out if you do not care for the documentation.
 +#
 +AliasMatch ^/​manual(?:/​(?:​de|en|es|fr|ja|ko|ru))?​(/​.*)?​$ "​C:/​Program Files/​Apache Group/​Apache2/​manual$1"​
 +
 +<​Directory "​C:/​Program Files/​Apache Group/​Apache2/​manual">​
 +    Options Indexes
 +    AllowOverride None
 +    Order allow,deny
 +    Allow from all
 +
 +    <Files *.html>
 +        SetHandler type-map
 +    </​Files>​
 +
 +    SetEnvIf Request_URI ^/​manual/​(de|en|es|fr|ja|ko|ru)/​ prefer-language=$1
 +    RedirectMatch 301 ^/​manual(?:/​(de|en|es|fr|ja|ko|ru)){2,​}(/​.*)?​$ /​manual/​$1$2
 +</​Directory>​
 +
 +#
 +# ScriptAlias:​ This controls which directories contain server scripts.
 +# ScriptAliases are essentially the same as Aliases, except that
 +# documents in the realname directory are treated as applications and
 +# run by the server when requested rather than as documents sent to the client.
 +# The same rules about trailing "/"​ apply to ScriptAlias directives as to
 +# Alias.
 +#
 +ScriptAlias /cgi-bin/ "​C:/​Program Files/​Apache Group/​Apache2/​cgi-bin/"​
 +
 +#
 +# "​C:/​Program Files/​Apache Group/​Apache2/​cgi-bin"​ should be changed to whatever your ScriptAliased
 +# CGI directory exists, if you have that configured.
 +#
 +<​Directory "​C:/​Program Files/​Apache Group/​Apache2/​cgi-bin">​
 +    AllowOverride None
 +    Options None
 +    Order allow,deny
 +    Allow from all
 +</​Directory>​
 +
 +#
 +# Redirect allows you to tell clients about documents which used to exist in
 +# your server'​s namespace, but do not anymore. This allows you to tell the
 +# clients where to look for the relocated document.
 +# Example:
 +# Redirect permanent /foo http://​www.example.com/​bar
 +
 +#
 +# Directives controlling the display of server-generated directory listings.
 +#
 +
 +#
 +# IndexOptions:​ Controls the appearance of server-generated directory
 +# listings.
 +#
 +IndexOptions FancyIndexing VersionSort
 +
 +#
 +# AddIcon* directives tell the server which icon to show for different
 +# files or filename extensions. ​ These are only displayed for
 +# FancyIndexed directories.
 +#
 +AddIconByEncoding (CMP,/​icons/​compressed.gif) x-compress x-gzip
 +
 +AddIconByType (TXT,/​icons/​text.gif) text/*
 +AddIconByType (IMG,/​icons/​image2.gif) image/*
 +AddIconByType (SND,/​icons/​sound2.gif) audio/*
 +AddIconByType (VID,/​icons/​movie.gif) video/*
 +
 +AddIcon /​icons/​binary.gif .bin .exe
 +AddIcon /​icons/​binhex.gif .hqx
 +AddIcon /​icons/​tar.gif .tar
 +AddIcon /​icons/​world2.gif .wrl .wrl.gz .vrml .vrm .iv
 +AddIcon /​icons/​compressed.gif .Z .z .tgz .gz .zip
 +AddIcon /​icons/​a.gif .ps .ai .eps
 +AddIcon /​icons/​layout.gif .html .shtml .htm .pdf
 +AddIcon /​icons/​text.gif .txt
 +AddIcon /​icons/​c.gif .c
 +AddIcon /​icons/​p.gif .pl .py
 +AddIcon /​icons/​f.gif .for
 +AddIcon /​icons/​dvi.gif .dvi
 +AddIcon /​icons/​uuencoded.gif .uu
 +AddIcon /​icons/​script.gif .conf .sh .shar .csh .ksh .tcl
 +AddIcon /​icons/​tex.gif .tex
 +AddIcon /​icons/​bomb.gif core
 +
 +AddIcon /​icons/​back.gif ..
 +AddIcon /​icons/​hand.right.gif README
 +AddIcon /​icons/​folder.gif ^^DIRECTORY^^
 +AddIcon /​icons/​blank.gif ^^BLANKICON^^
 +
 +#
 +# DefaultIcon is which icon to show for files which do not have an icon
 +# explicitly set.
 +#
 +DefaultIcon /​icons/​unknown.gif
 +
 +#
 +# AddDescription allows you to place a short description after a file in
 +# server-generated indexes. ​ These are only displayed for FancyIndexed
 +# directories.
 +# Format: AddDescription "​description"​ filename
 +#
 +#​AddDescription "GZIP compressed document"​ .gz
 +#​AddDescription "tar archive"​ .tar
 +#​AddDescription "GZIP compressed tar archive"​ .tgz
 +
 +#
 +# ReadmeName is the name of the README file the server will look for by
 +# default, and append to directory listings.
 +#
 +# HeaderName is the name of a file which should be prepended to
 +# directory indexes. ​
 +ReadmeName README.html
 +HeaderName HEADER.html
 +
 +#
 +# IndexIgnore is a set of filenames which directory indexing should ignore
 +# and not include in the listing. ​ Shell-style wildcarding is permitted.
 +#
 +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
 +
 +#
 +# DefaultLanguage and AddLanguage allows you to specify the language of 
 +# a document. You can then use content negotiation to give a browser a 
 +# file in a language the user can understand.
 +#
 +# Specify a default language. This means that all data
 +# going out without a specific language tag (see below) will 
 +# be marked with this one. You probably do NOT want to set
 +# this unless you are sure it is correct for all cases.
 +#
 +# * It is generally better to not mark a page as 
 +# * being a certain language than marking it with the wrong
 +# * language!
 +#
 +# DefaultLanguage nl
 +#
 +# Note 1: The suffix does not have to be the same as the language
 +# keyword --- those with documents in Polish (whose net-standard
 +# language code is pl) may wish to use "​AddLanguage pl .po" to
 +# avoid the ambiguity with the common suffix for perl scripts.
 +#
 +# Note 2: The example entries below illustrate that in some cases 
 +# the two character '​Language'​ abbreviation is not identical to 
 +# the two character '​Country'​ code for its country,
 +# E.g. '​Danmark/​dk'​ versus '​Danish/​da'​.
 +#
 +# Note 3: In the case of '​ltz'​ we violate the RFC by using a three char
 +# specifier. There is 'work in progress'​ to fix this and get
 +# the reference data for rfc1766 cleaned up.
 +#
 +# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
 +# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
 +# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
 +# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
 +# Norwegian (no) - Polish (pl) - Portugese (pt)
 +# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
 +# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
 +#
 +AddLanguage ca .ca
 +AddLanguage cs .cz .cs
 +AddLanguage da .dk
 +AddLanguage de .de
 +AddLanguage el .el
 +AddLanguage en .en
 +AddLanguage eo .eo
 +AddLanguage es .es
 +AddLanguage et .et
 +AddLanguage fr .fr
 +AddLanguage he .he
 +AddLanguage hr .hr
 +AddLanguage it .it
 +AddLanguage ja .ja
 +AddLanguage ko .ko
 +AddLanguage ltz .ltz
 +AddLanguage nl .nl
 +AddLanguage nn .nn
 +AddLanguage no .no
 +AddLanguage pl .po
 +AddLanguage pt .pt
 +AddLanguage pt-BR .pt-br
 +AddLanguage ru .ru
 +AddLanguage sv .sv
 +AddLanguage zh-CN .zh-cn
 +AddLanguage zh-TW .zh-tw
 +
 +#
 +# LanguagePriority allows you to give precedence to some languages
 +# in case of a tie during content negotiation.
 +#
 +# Just list the languages in decreasing order of preference. We have
 +# more or less alphabetized them here. You probably want to change this.
 +#
 +LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
 +
 +#
 +# ForceLanguagePriority allows you to serve a result page rather than
 +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
 +# [in case no accepted languages matched the available variants]
 +#
 +ForceLanguagePriority Prefer Fallback
 +
 +#
 +# Commonly used filename extensions to character sets. You probably
 +# want to avoid clashes with the language extensions, unless you
 +# are good at carefully testing your setup after each change.
 +# See http://​www.iana.org/​assignments/​character-sets for the
 +# official list of charset names and their respective RFCs.
 +#
 +AddCharset ISO-8859-1 ​ .iso8859-1 .latin1
 +AddCharset ISO-8859-2 ​ .iso8859-2 .latin2 .cen
 +AddCharset ISO-8859-3 ​ .iso8859-3 .latin3
 +AddCharset ISO-8859-4 ​ .iso8859-4 .latin4
 +AddCharset ISO-8859-5 ​ .iso8859-5 .latin5 .cyr .iso-ru
 +AddCharset ISO-8859-6 ​ .iso8859-6 .latin6 .arb
 +AddCharset ISO-8859-7 ​ .iso8859-7 .latin7 .grk
 +AddCharset ISO-8859-8 ​ .iso8859-8 .latin8 .heb
 +AddCharset ISO-8859-9 ​ .iso8859-9 .latin9 .trk
 +AddCharset ISO-2022-JP .iso2022-jp .jis
 +AddCharset ISO-2022-KR .iso2022-kr .kis
 +AddCharset ISO-2022-CN .iso2022-cn .cis
 +AddCharset Big5        .Big5       .big5
 +# For russian, more than one charset is used (depends on client, mostly):
 +AddCharset WINDOWS-1251 .cp-1251 ​  ​.win-1251
 +AddCharset CP866       ​.cp866
 +AddCharset KOI8-r ​     .koi8-r .koi8-ru
 +AddCharset KOI8-ru ​    ​.koi8-uk .ua
 +AddCharset ISO-10646-UCS-2 .ucs2
 +AddCharset ISO-10646-UCS-4 .ucs4
 +AddCharset UTF-8       .utf8
 +
 +# The set below does not map to a specific (iso) standard
 +# but works on a fairly wide range of browsers. Note that
 +# capitalization actually matters (it should not, but it
 +# does for some browsers).
 +#
 +# See http://​www.iana.org/​assignments/​character-sets
 +# for a list of sorts. But browsers support few.
 +#
 +AddCharset GB2312 ​     .gb2312 .gb 
 +AddCharset utf-7       .utf7
 +AddCharset utf-8       .utf8
 +AddCharset big5        .big5 .b5
 +AddCharset EUC-TW ​     .euc-tw
 +AddCharset EUC-JP ​     .euc-jp
 +AddCharset EUC-KR ​     .euc-kr
 +AddCharset shift_jis ​  .sjis
 +
 +#
 +# AddType allows you to add to or override the MIME configuration
 +# file mime.types for specific file types.
 +#
 +#AddType application/​x-tar .tgz
 +#
 +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
 +# information on the fly. Note: Not all browsers support this.
 +# Despite the name similarity, the following Add* directives have nothing
 +# to do with the FancyIndexing customization directives above.
 +#
 +#​AddEncoding x-compress .Z
 +#​AddEncoding x-gzip .gz .tgz
 +#
 +# If the AddEncoding directives above are commented-out,​ then you
 +# probably should define those extensions to indicate media types:
 +#
 +AddType application/​x-compress .Z
 +AddType application/​x-gzip .gz .tgz
 +
 +#
 +# AddHandler allows you to map certain file extensions to "​handlers":​
 +# actions unrelated to filetype. These can be either built into the server
 +# or added with the Action directive (see below)
 +#
 +# To use CGI scripts outside of ScriptAliased directories:​
 +# (You will also need to add "​ExecCGI"​ to the "​Options"​ directive.)
 +#
 +#AddHandler cgi-script .cgi
 +
 +#
 +# For files that include their own HTTP headers:
 +#
 +#AddHandler send-as-is asis
 +
 +#
 +# For server-parsed imagemap files:
 +#
 +#AddHandler imap-file map
 +
 +#
 +# For type maps (negotiated resources):
 +# (This is enabled by default to allow the Apache "It Worked"​ page
 +#  to be distributed in multiple languages.)
 +#
 +AddHandler type-map var
 +
 +#
 +# Filters allow you to process content before it is sent to the client.
 +#
 +# To parse .shtml files for server-side includes (SSI):
 +# (You will also need to add "​Includes"​ to the "​Options"​ directive.)
 +#
 +#AddType text/html .shtml
 +#​AddOutputFilter INCLUDES .shtml
 +
 +#
 +# Action lets you define media types that will execute a script whenever
 +# a matching file is called. This eliminates the need for repeated URL
 +# pathnames for oft-used CGI file processors.
 +# Format: Action media/type /​cgi-script/​location
 +# Format: Action handler-name /​cgi-script/​location
 +#
 +
 +#
 +# Customizable error responses come in three flavors:
 +# 1) plain text 2) local redirects 3) external redirects
 +#
 +# Some examples:
 +#​ErrorDocument 500 "The server made a boo boo."
 +#​ErrorDocument 404 /​missing.html
 +#​ErrorDocument 404 "/​cgi-bin/​missing_handler.pl"​
 +#​ErrorDocument 402 http://​www.example.com/​subscription_info.html
 +#
 +
 +#
 +# Putting this all together, we can internationalize error responses.
 +#
 +# We use Alias to redirect any /​error/​HTTP_<​error>​.html.var response to
 +# our collection of by-error message multi-language collections. ​ We use 
 +# includes to substitute the appropriate text.
 +#
 +# You can modify the messages'​ appearance without changing any of the
 +# default HTTP_<​error>​.html.var files by adding the line:
 +#
 +#   Alias /​error/​include/​ "/​your/​include/​path/"​
 +#
 +# which allows you to create your own set of files by starting with the
 +# @exp_errordir@/​include/​ files and copying them to /​your/​include/​path/, ​
 +# even on a per-VirtualHost basis. ​ The default include files will display
 +# your Apache version number and your ServerAdmin email address regardless
 +# of the setting of ServerSignature.
 +#
 +# The internationalized error documents require mod_alias, mod_include
 +# and mod_negotiation. ​ To activate them, uncomment the following 30 lines.
 +
 +#    Alias /error/ "​@exp_errordir@/"​
 +#
 +#    <​Directory "​@exp_errordir@">​
 +#        AllowOverride None
 +#        Options IncludesNoExec
 +#        AddOutputFilter Includes html
 +#        AddHandler type-map var
 +#        Order allow,deny
 +#        Allow from all
 +#        LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
 +#        ForceLanguagePriority Prefer Fallback
 +#    </​Directory>​
 +#
 +#    ErrorDocument 400 /​error/​HTTP_BAD_REQUEST.html.var
 +#    ErrorDocument 401 /​error/​HTTP_UNAUTHORIZED.html.var
 +#    ErrorDocument 403 /​error/​HTTP_FORBIDDEN.html.var
 +#    ErrorDocument 404 /​error/​HTTP_NOT_FOUND.html.var
 +#    ErrorDocument 405 /​error/​HTTP_METHOD_NOT_ALLOWED.html.var
 +#    ErrorDocument 408 /​error/​HTTP_REQUEST_TIME_OUT.html.var
 +#    ErrorDocument 410 /​error/​HTTP_GONE.html.var
 +#    ErrorDocument 411 /​error/​HTTP_LENGTH_REQUIRED.html.var
 +#    ErrorDocument 412 /​error/​HTTP_PRECONDITION_FAILED.html.var
 +#    ErrorDocument 413 /​error/​HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
 +#    ErrorDocument 414 /​error/​HTTP_REQUEST_URI_TOO_LARGE.html.var
 +#    ErrorDocument 415 /​error/​HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
 +#    ErrorDocument 500 /​error/​HTTP_INTERNAL_SERVER_ERROR.html.var
 +#    ErrorDocument 501 /​error/​HTTP_NOT_IMPLEMENTED.html.var
 +#    ErrorDocument 502 /​error/​HTTP_BAD_GATEWAY.html.var
 +#    ErrorDocument 503 /​error/​HTTP_SERVICE_UNAVAILABLE.html.var
 +#    ErrorDocument 506 /​error/​HTTP_VARIANT_ALSO_VARIES.html.var
 +
 +
 +
 +#
 +# The following directives modify normal HTTP response behavior to
 +# handle known problems with browser implementations.
 +#
 +BrowserMatch "​Mozilla/​2"​ nokeepalive
 +BrowserMatch "MSIE 4\.0b2;"​ nokeepalive downgrade-1.0 force-response-1.0
 +BrowserMatch "​RealPlayer 4\.0" force-response-1.0
 +BrowserMatch "​Java/​1\.0"​ force-response-1.0
 +BrowserMatch "​JDK/​1\.0"​ force-response-1.0
 +
 +#
 +# The following directive disables redirects on non-GET requests for
 +# a directory that does not include the trailing slash. ​ This fixes a 
 +# problem with Microsoft WebFolders which does not appropriately handle ​
 +# redirects for folders with DAV methods.
 +# Same deal with Apple'​s DAV filesystem and Gnome VFS support for DAV.
 +#
 +BrowserMatch "​Microsoft Data Access Internet Publishing Provider"​ redirect-carefully
 +BrowserMatch "​^WebDrive"​ redirect-carefully
 +BrowserMatch "​^WebDAVFS/​1.[012]"​ redirect-carefully
 +BrowserMatch "​^gnome-vfs"​ redirect-carefully
 +
 +#
 +# Allow server status reports generated by mod_status,
 +# with the URL of http://​servername/​server-status
 +# Change the "​domain.mnain.org"​ to match your domain to enable.
 +#
 +#<​Location /​server-status>​
 +#    SetHandler server-status
 +#    Order deny,allow
 +#    Deny from all
 +#    Allow from domain.mnain.org
 +#</​Location>​
 +
 +#
 +# Allow remote server configuration reports, with the URL of
 +#  http://​servername/​server-info (requires that mod_info.c be loaded).
 +# Change the "​domain.mnain.org"​ to match your domain to enable.
 +#
 +#<​Location /​server-info>​
 +#    SetHandler server-info
 +#    Order deny,allow
 +#    Deny from all
 +#    Allow from domain.mnain.org
 +#</​Location>​
 +
 +
 +#
 +# Bring in additional module-specific configurations
 +#
 +<​IfModule mod_ssl.c>​
 +    Include conf/​ssl.conf
 +</​IfModule>​
 +
 +
 +### Section 3: Virtual Hosts
 +#
 +# VirtualHost:​ If you want to maintain multiple domains/​hostnames on your
 +# machine you can setup VirtualHost containers for them. Most configurations
 +# use only name-based virtual hosts so the server doesn'​t need to worry about
 +# IP addresses. This is indicated by the asterisks in the directives below.
 +#
 +# Please see the documentation at 
 +# <​URL:​http://​httpd.apache.org/​docs-2.0/​vhosts/>​
 +# for further details before you try to setup virtual hosts.
 +#
 +# You may use the command line option '​-S'​ to verify your virtual host
 +# configuration.
 +
 +#
 +# Use name-based virtual hosting.
 +#
 +#​NameVirtualHost *:80
 +
 +#
 +# VirtualHost example:
 +# Almost any Apache directive may go into a VirtualHost container.
 +# The first VirtualHost section is used for requests without a known
 +# server name.
 +#
 +#<​VirtualHost *:80>
 +#    ServerAdmin webmaster@dummy-host.example.com
 +#    DocumentRoot /​www/​docs/​dummy-host.example.com
 +#    ServerName dummy-host.example.com
 +#    ErrorLog logs/​dummy-host.example.com-error_log
 +#    CustomLog logs/​dummy-host.example.com-access_log common
 +#</​VirtualHost>​
 +
 +<​Location /​server-status>​
 +SetHandler server-status
 +
 +Order Deny,Allow
 +#Deny from all
 +Allow from all
 +</​Location>​
 +</​code>​
 +
 +----
 +
 +  * [[apache|Back to Apache]]
  
httpd_conf.txt ยท Last modified: 2014/10/26 01:52 (external edit)
CC Attribution-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0